telco site design – Maratustech

29 Jul

Optus site inspection instruction

Posted by maratus
optus, optus site inspection, Telco, telco inspection, telco site design, telecom, telecom Australia
Leave a comment

Inspections The Supplier will notify Optus at least 24 hours in advance of inspections required or requested to be made by Optus or their representative. Where inspections are required by Council or other statutory or...

02 Jul

Telco

Instruction of Site Elevation Drawing in telecom industry

Posted by maratus
instruction, matarustech, optus, site dwg, site elevation drawing, tehlecom, telco site design
Leave a comment

Site Elevation Drawing Draft Site Elevation drawing (‘P2’) shall contain the following information: Tower / building / structure elevation drawn in landscape layout at an appropriate scale to fill the drawing sheet Show existing antennas...

10 May

Telco

OPTUS Site Design Environmental Protection

Posted by maratus
maratustech, optus, optus instruction, telco site design, telecom in Australia, telecom instruction
Leave a comment

General The Supplier will take all steps necessary to protect the environment and in particular will meet the requirements of this section. Surface Waters Any surface water collected on site is to be discharged in a manner...

25 Jan

Telco

Optus Telco Site Fence design

Posted by maratus
maratustech, optus, Optus Telco Site Fence design, OSD10, Telco, telco site design, telecom site fence
Leave a comment

Site Fence 1. Standards Selection of a fence or not is to follow the section Site Fence Decision Strategy. All materials for the supply and construction of boundary and security fences, including all gates, posts and...

Tag Archives: telco site design

Optus site inspection instruction

Instruction of Site Elevation Drawing in telecom industry

OPTUS Site Design Environmental Protection

Optus Telco Site Fence design

5G Component list for eJV telco sites

Telecom Shroud Cover

Nokia AirScale Dual RRH 4T4R B1/3 400 W (AHEGC)

AI Rendering

Ericsson AIR3239 NR2.3-3.6