Antenna Shroud means the three-sided cover that is mounted at the base of the antenna to conceal the appearance of the cables and wires from the hand-hole port on the pole to the bottom-fed antenna.
09
Mar
Blog
Related Posts
26
Dec
Colar H-Frame Structure
Colar H-Frame Structure
Vodafone 5G upgrade by Nokia Equipment
28
Sep
Antenna Structures and Design
Antenna Structures and Design
Axicom Structures
The expansion of Axicom sub-licence reference design, to include 5G AAUs / additional equipment at eJV Axicom sites, is subject to agreement between the Operators and is currently out of...
09
Sep
5G site design by Revit
New 5G site design project by Revit in ACT Australia
Description
Telecom Equipment family design in Revit
Site Topography
Site design with Revit
presentation rendering with Twinmotion
01
Aug
Antennas EME Exclusion Zones
Prior to Revision 6, the Antennas EME Exclusion Zones drawing (‘R1’), when provided, showed occupational and general public EME exclusion zones ‘plume’ diagrams, based on information provided by Optus, for single isolated antennas with...
29
Jul
Optus site inspection instruction
Inspections
The Supplier will notify Optus at least 24 hours in advance of inspections required or requested to be made by Optus or their representative. Where inspections are required by Council or other statutory or...
26
Jul
Australia Telecom abbreviation
Term / Abbreviation
Description
AB
AS Built
CAD
Computer Aided Drafting
Check-In
Process within the OPTUS Drawing Management System where OPTUS approved drawing file is uploaded into the system.
Check-Out
Process within the OPTUS Drawing Management System to download a...
12
Jul
What is As Built Drawings in Telecom Industry
As Built Drawings instruction
The Supplier’s QMP must set-out a process for the production of the Site As-Built drawings. As-built drawings are to be produced for all site works that involve any external works or...
29
Jun
What is DSL in Telco industry
Draft Site Layout (DSL) Drawings
Prime & Backup Candidates
Draft Site Layout drawings for the prime candidate are intended for presentation to site providers and relevant authorities, therefore the drawing presentation is important. It should correctly...
01
Mar
Optus & Vodafone 5G SOW
Optus & Vodafone 5G SOW
General
The initial release of this document is intended to provide all information necessary for site upgrades
to achieve "Phase 1" of the 5G eJV project, at which point a SAED vendor...
31
Jan
Telecom EME Signage in Australia
Telecom EME Signage in Australia
Definitions & Abbreviations
IBS Low Power Antenna (In-Building System refer Section 5.1 of RFSCP)
Cat 1 IBC = General Public Limit not exceeding 100mm from any one antenna
Cat 2 IBC = General...