OPTUS HEADFRAME ARRANGEMENTS TB4 WITH CLAMP
15
Jun
Blog
Related Posts
15
Apr
BIM in the Telco industry
BIM, or Building Information Modeling, is a process that involves creating a digital representation of a building or infrastructure project. While BIM is typically associated with the construction industry, it can also...
22
May
What is Sector Assembly in Telco?
The Vodafone Sector Assembly is a prefabricated frame that arrives on site with all antennas, radio, cables, and ancillary in the warehouse, the units are stored, and marked ready for deployment.
23
Sep
what is small cell ?
what is small cell ?
A small cell is a low powered mobile base station designed to provide mobile phone coverage within an area of approximately 1OOm to 400m from the small cell. The equipment...
29
Jul
Optus site inspection instruction
Inspections
The Supplier will notify Optus at least 24 hours in advance of inspections required or requested to be made by Optus or their representative. Where inspections are required by Council or other statutory or...
26
Jul
Australia Telecom abbreviation
Term / Abbreviation
Description
AB
AS Built
CAD
Computer Aided Drafting
Check-In
Process within the OPTUS Drawing Management System where OPTUS approved drawing file is uploaded into the system.
Check-Out
Process within the OPTUS Drawing Management System to download a...
21
Jul
EME Reporting Process
EME Reporting Process
As the lead carrier is responsible for running any required Deployment Code processes and notifications, the lead carriers RF team will be responsible for creating and uploading the EME report and RFmap2...
16
Jul
New Works at Existing Sites
If new works are to be carried out at an existing Optus site (such as network re-arrangement, technology upgrade or transmission upgrade) then the relevant AS BUILT Site Drawings stored on the Optus DMS...
12
Jul
What is As Built Drawings in Telecom Industry
As Built Drawings instruction
The Supplier’s QMP must set-out a process for the production of the Site As-Built drawings. As-built drawings are to be produced for all site works that involve any external works or...
08
Jul
As Built Redline Drawing Requirements in Telco industry
As part of its Supplier’s QMP, the Phase 3 & 4 Supplier must have a process for the redline marking-up of the For Construction drawing set.
The purpose of the redline drawings it to provide...
04
Jul
Optus Not For Construction Drawings
NOT FOR CONSTRUCTION drawings are occasionally used to acquire (in property terms) the nominated preferred candidate site. The NFC site package includes a site layout and set-out, a site elevation, and a cover sheet....
02
Jul
Instruction of Site Elevation Drawing in telecom industry
Site Elevation Drawing
Draft Site Elevation drawing (‘P2’) shall contain the following information:
Tower / building / structure elevation drawn in landscape layout at an appropriate scale to fill the drawing sheet
Show existing antennas...
29
Jun
What is DSL in Telco industry
Draft Site Layout (DSL) Drawings
Prime & Backup Candidates
Draft Site Layout drawings for the prime candidate are intended for presentation to site providers and relevant authorities, therefore the drawing presentation is important. It should correctly...