A small cell is a low powered mobile base station designed to provide mobile phone coverage within an area of approximately 1OOm to 400m from the small cell. The equipment is of a much...
The Supplier will notify Optus at least 24 hours in advance of inspections required or requested to be made by Optus or their representative. Where inspections are required by Council or other statutory or...
Term / Abbreviation
Computer Aided Drafting
Process within the OPTUS Drawing Management System where OPTUS approved drawing file is uploaded into the system.
Process within the OPTUS Drawing Management System to download a...
As part of its Supplier’s QMP, the Phase 3 & 4 Supplier must have a process for the redline marking-up of the For Construction drawing set.
The purpose of the redline drawings it to provide...
NOT FOR CONSTRUCTION drawings are occasionally used to acquire (in property terms) the nominated preferred candidate site. The NFC site package includes a site layout and set-out, a site elevation, and a cover sheet....
Site Elevation Drawing
Draft Site Elevation drawing (‘P2’) shall contain the following information:
Tower / building / structure elevation drawn in landscape layout at an appropriate scale to fill the drawing sheet
Show existing antennas...
Draft Site Layout (DSL) Drawings
Prime & Backup Candidates
Draft Site Layout drawings for the prime candidate are intended for presentation to site providers and relevant authorities, therefore the drawing presentation is important. It should correctly...
The typical types of drawing packages produced for the Optus Project are as follows:
DRAFT SITE LAYOUT (PRELIMINARY) or FOR APPROVAL
NOT FOR CONSTRUCTION
NEW WORKS AT EXISTING SITES
OPTUS HEADFRAME ARRANGEMENTS TB4 WITH CLAMP
Maximum feeders through a standard gland plate
Standard sized antenna gland plates (600mm x 400mm) have various existing configurations. Refer to each operator's Deployment Guideline for the appropriate site solution.
On a site by site basis,...