List of AUU type used in 5G Optus Upgrade
New 5G site design project by Revit in ACT Australia
Telecom Equipment family design in Revit
Site design with Revit
presentation rendering with Twinmotion
Prior to Revision 6, the Antennas EME Exclusion Zones drawing (‘R1’), when provided, showed occupational and general public EME exclusion zones ‘plume’ diagrams, based on information provided by Optus, for single isolated antennas with...
The Supplier will notify Optus at least 24 hours in advance of inspections required or requested to be made by Optus or their representative. Where inspections are required by Council or other statutory or...
Term / Abbreviation
Computer Aided Drafting
Process within the OPTUS Drawing Management System where OPTUS approved drawing file is uploaded into the system.
Process within the OPTUS Drawing Management System to download a...
EME Reporting Process
As the lead carrier is responsible for running any required Deployment Code processes and notifications, the lead carriers RF team will be responsible for creating and uploading the EME report and RFmap2...
If new works are to be carried out at an existing Optus site (such as network re-arrangement, technology upgrade or transmission upgrade) then the relevant AS BUILT Site Drawings stored on the Optus DMS...
As Built Drawings instruction
The Supplier’s QMP must set-out a process for the production of the Site As-Built drawings. As-built drawings are to be produced for all site works that involve any external works or...