NOT FOR CONSTRUCTION drawings are occasionally used to acquire (in property terms) the nominated preferred candidate site. The NFC site package includes a site layout and set-out, a site elevation, and a cover sheet. The NFC package is usually based on the site survey. Use the OPTUS-FC.dwg drawing template with issue status NOT FOR CONSTRUCTION. Drawing layouts in the template not required at NOT FOR CONSTRUCTION stage should be retained in readiness for the FOR CONSTRUCTION stage. New work is now noted ‘OPTUS’ and no longer noted as ‘PROPOSED’. All relevant existing features arenoted as ‘EXISTING’. The site layout and set-out drawing(s) are usually drawn from the site survey. The set-out of the equipment shelter (or fit-out) and the set-out of the antennas should be finalised at this point to facilitate preparation of a lease (or licence) in order to acquire the site.
A pdf copy of the latest NOT FOR CONSTRUCTION drawings shall be uploaded on to the Optus MNISLibrary under the Site number and Work Authority number released for the Works.
The Supplier will notify Optus at least 24 hours in advance of inspections required or requested to be made by Optus or their representative. Where inspections are required by Council or other statutory or...
Term / Abbreviation
Computer Aided Drafting
Process within the OPTUS Drawing Management System where OPTUS approved drawing file is uploaded into the system.
Process within the OPTUS Drawing Management System to download a...
As Built Drawings instruction
The Supplier’s QMP must set-out a process for the production of the Site As-Built drawings. As-built drawings are to be produced for all site works that involve any external works or...
Site Elevation Drawing
Draft Site Elevation drawing (‘P2’) shall contain the following information:
Tower / building / structure elevation drawn in landscape layout at an appropriate scale to fill the drawing sheet
Show existing antennas...
Draft Site Layout (DSL) Drawings
Prime & Backup Candidates
Draft Site Layout drawings for the prime candidate are intended for presentation to site providers and relevant authorities, therefore the drawing presentation is important. It should correctly...
The typical types of drawing packages produced for the Optus Project are as follows:
DRAFT SITE LAYOUT (PRELIMINARY) or FOR APPROVAL
NOT FOR CONSTRUCTION
NEW WORKS AT EXISTING SITES
Certain technologies will require the installation of a GPS antenna for synchronization. As part of the deployment a GPS antenna needs to be installed externally. Optus is responsible to supply and install the...
RRU installation instruction in EJV Telco sites
Every installation scenario must be assessed individually with special consideration in mind of ongoing maintenance of hardware from an operations perspective. Any RRU installations which will have an...
Maximum feeders through a standard gland plate
Standard sized antenna gland plates (600mm x 400mm) have various existing configurations. Refer to each operator's Deployment Guideline for the appropriate site solution.
On a site by site basis,...